What's new
What we have shipped, newest first. Laid out like the revision table on a drawing sheet: a revision number, the date it went live, and one line on what is different.
A change appears here once it is live for everyone, so anything on this page is something you can use today. Smaller fixes and behind-the-scenes work are left out.
Week of 13 Oct
13 - 19 October 2026
- 266
Account owners can edit teammates' checklists from chat
Account owners editing a checklist created by a teammate through chat were refused with a permission error even though the checklist editor allowed it. Chat now applies the same permissions as the checklist editor.
- 265
The active document tab is now highlighted
When several document sets are open as tabs, the one you are viewing now has an accent bar and a bold label, so you can see which set is active.
- 264
Filter the issues list to the document open in the viewer
A new 'This document' toggle in the issues toolbar shows only the issues from the document set open in the viewer, across all of its pages. This helps when you work through one set while others are open as tabs.
- 263
Starting a review keeps the questions you typed while documents were processing
Pressing Start review now sends the questions you typed in the box along with the standard review, and a request from a different chat no longer replaces yours. If a request is replaced, you are told by notification and email which request replaced it.
- 262
Options on the Ask step no longer overlap the tiles below on short laptop screens
On short windows, the workflow, review and Codes options on the Ask step used to draw over the row of tiles beneath them. The step now scrolls instead, and a long list of checks scrolls inside its own section.
- 261
Everyone on your account can now edit the built-in review checklists
The edit pen on built-in checklists and on issue cards is now available to every member of your account, not only administrators. Your edits stay within your own account.
Week of 6 Oct
6 - 12 October 2026
- 260
Starting a code review by a code book's full title no longer fails
A code review that named a book by its full title could add the book to the project and then refuse to start with "no code book you can read matches this code"; it now starts.
- 259
Bulk tagging from the Revit chat is faster and places fewer, non-overlapping tags
For Revit users, bulk tagging from chat now skips short stubs, avoids repeating the same size close together and fixes clashing tags, cutting one test floor from 307 tags with 107 overlaps to 54 tags with none. Large tagging jobs also run in fewer, faster steps.
- 258
Delete stops queued and running checks, and organization owners can delete custom checks
The trash button now stops a check that is queued or running and is always visible on checklist rows in the results feed. Organization owners can also delete any custom check they can see.
- 257
Code review findings are counted under the code they cite
In code review results, each finding is now counted under the code book it actually cites.
- 256
Code review findings now count under the code they cite
When a review area draws on several codes, each finding is now counted under the code it actually cites instead of the area's main code. A code's count no longer reads 0 while its findings are filed under another code.
- 255
A code edition you name is the edition that gets used
When you ask for a specific code edition, reviews and answers use that edition, or the closest edition in your library with a clear label saying so.
- 254
Start a version comparison from chat
Chat can show a Compare Versions card where you pick the two versions, and the comparison report comes back in the same conversation.
- 253
Resolve, waive, reopen or unassign issues from chat after one confirmation
Chat can now change the status of issues or take a person off open issues once you confirm on a single card that lists the items. If you do not have permission for the change, chat tells you before showing the card.
- 252
Duplicate a custom check from chat
Ask chat to make a copy of one of your custom checks to use as a starting point for a new one.
- 251
Reviews started from chat report their results back in the conversation
When a run you started from chat finishes, chat posts the result with issue counts and a link to that run's issues.
- 250
Download a whole folder from the file tree
Right-click a folder in the file tree to download it as a zip, with progress shown while it is prepared.
- 249
Formal reviews requested in chat now start after a single question
When you ask chat for a review against a named code or standard, choosing a formal review now starts it straight away, and the code edition, scope and threshold are shown in the review plan instead of being asked up front. If your email notifications are off, the launch message offers to email you when the review finishes.
- 248
Export to Bluebeam is offered before you connect, and sign-in brings you back to the project
The export menu now shows the Bluebeam option even if you have not connected yet, and after signing in you return to the project you were exporting from.
- 247
Exported issue marks use the same colours as the viewer
Issue marks in exports now match the colours you see on screen, so resolved issues show in green.
- 246
Bluebeam exports keep cloud comments, labels and markups drawn in chat
A plain cloud now keeps its comment and its label stays on the page, and callouts, text boxes and other markups drawn by chat are included and look as they do on screen.
- 245
Deleting a document removes its issues from an open Issues tab right away
Issues from a deleted document no longer linger in the Issues tab until you reload the page.
- 244
Files chat creates no longer fail to save after an earlier save in the same reply
When chat saved more than one file in a single reply, the later files could fail to save; they now save as expected.
- 243
Chat can open every file in projects with more than 300 documents
In large projects chat could only reach the first 300 documents; it can now open any file in projects of up to 2,000 documents.
- 242
Spelling check stops correcting acronyms and its underline stays on its own line
The spelling check no longer flags acronyms as misspellings, and its squiggly underline no longer runs into the line below.
- 241
Show or hide issues on the drawing from chat
Ask chat to show only critical issues or hide the low ones, and the drawing viewer filters its issue marks, with a Show all issues banner to bring them back. Nothing is resolved or deleted.
- 240
Moved callouts on cross-sheet code review findings now save
Dragging a callout on a finding from a cross-sheet code review used to snap back after a reload; it now saves, and a failed save shows a message.
- 239
Selecting a markup shows a small chip beside it instead of a popup on top of it
The chip shows the markup type and value and sits next to the markup, so its points stay visible. Hover over it to expand it into the full popup.
- 238
Pan with the middle mouse button without leaving the active tool
Hold the wheel button to pan the sheet while any tool is active, and a half-drawn measurement or polyline carries on after the pan.
- 237
Books you mark as spec books are no longer flagged May not be a code book
A book you have marked as a spec book is treated as your choice, so the warning no longer appears in your library or on the project's codes tab.
- 236
Clicking an issue's box on the drawing opens that issue's card
Clicking a highlighted box on a sheet now opens the matching issue's card in the Issues list, so you can go straight from the drawing to the details.
- 235
Saving project settings no longer erases auto-filled project details
Saving the settings dialog used to clear a project number, location or client that had been filled in automatically and stop it being filled again. Now only the fields you edit are saved.
- 234
Files attached in a project chat stay available for the whole conversation
Attachments are no longer limited to the message they were sent with, so later questions in the same project chat can still use them.
- 233
Custom check runs no longer lose all their findings over one malformed code reference
A run where one finding cited a code section in an unexpected format used to discard every finding from that run; the findings are now kept.
- 232
Issue boxes on drawings sit tight to the cited area, with smaller boxes drawn on top
Issue boxes are drawn without padding, and where boxes overlap the smaller one is drawn on top. Findings tied to a page but not to a spot on it are listed in the not-located tray.
- 231
A code review that leaves areas unreviewed now says so and offers to review the rest
The code results, chat and notification show how many areas were covered, for example 25 of 37, with a button to review the remaining ones.
- 230
Get a warning when you upload a file that's already in one of your projects
A notification tells you when an uploaded file is identical to one already in this project or another project you belong to. It only warns and never blocks the upload.
- 229
The custom checks source picker no longer offers drawing sets or code books as checklists
Only checklists are offered as the source when making custom checks.
- 228
Export only the issues you have selected in the Issues table
When you tick issues in the Issues table, the export dialog now offers to export only those selected issues, and it is on by default. Resolved or waived issues you picked are kept, and unticking the option exports every visible issue as before.
- 227
Chat no longer wrongly tells members they are view-only
If chat couldn't confirm your access, it used to say you were view-only and work could be lost. It now retries and, if it still can't confirm, asks you to try again.
- 226
Chat can export just the marked-up sheets or a page range, and no longer calls a full export empty
Ask chat to export only the sheets that carry markups, or a page range of one document, and it saves that as a separate PDF. Chat also no longer tells you an exported file is empty when your clouds, callouts and measurements were drawn.
- 225
Takeoff can add a column for the source model or any Revit parameter
For Revit users, takeoffs record which model or linked model each row comes from, with a By model tab, and you can group, filter, sort or add a column by any Revit parameter. Exports include the model and any extra columns.
- 224
Chat can delete a whole checklist for you
Ask chat to delete a checklist and it shows what will be removed, then deletes it after you approve, instead of removing items one at a time. Items cannot be removed from a checklist while a run of it is still going.
- 223
Review plans keep the checklists they write to themselves, and check everything picks checks for your set
A checklist a review plan writes from your request is no longer added to your library or switched on for other projects unless you run the plan, and it is named by your request alone. A general ask such as check everything now picks up to 10 checks suited to the drawing set.
- 222
Spelling highlights cover just the misspelt word, not the whole line
A typo inside a title or note is now underlined on its own, rather than the entire line of text around it.
- 221
An upload that is being read shows as running, not queued
Your activity list now shows a new upload as running while it is being read, instead of queued for the whole time.
- 220
Measurements are more precise and update when you change the page scale
Measure and calibration clicks are no longer rounded to a coarse grid, which could add about 3.5 inches of real length per step at 1/8" = 1'-0" on a 36" sheet. Saved measurement labels now recalculate when you change the page scale.
- 219
Times on the home page and the Revit add-in home now show in your own time zone
Some times listed on the home page and on the home screen inside the Revit add-in were shifted by your time zone offset. They now show the correct local time.
- 218
Uploads finish even if you were signed out while the file was arriving
An upload whose file landed after you were signed out now completes on its own. The sign-out notice explains when it happened because your account signed in on another browser or device.
- 217
Large issue exports no longer hang, and retry automatically if an attempt fails
Exporting an issue list for a very large drawing set no longer stalls with a progress bar that never moves. If an export attempt fails or runs long, it now retries automatically up to 3 times, showing "retrying automatically" while you wait, and only reports a failure with the reason once those attempts are used.
- 216
Project settings keep what you typed while the project refreshes
Edits typed into the project settings dialog are no longer wiped when the project refreshes in the background.
- 215
Open pages update when teammates or other tabs change projects and runs
Project and run pages you have open now refresh on their own when a teammate, another tab or a background task changes them.
- 214
Chat finds a code book in your library when you name it by its full title
Naming a code book by its full title in chat now finds it in your library, even when the book is usually known by an abbreviation.
- 213
Exported issue letters print each issue's own number
The export letter now uses each issue's own number, and changing the numbering mode produces a fresh export instead of reusing the old one.
- 212
A reminder when you leave a chat with a checklist that was never launched
If you leave a chat that was set up to run a checklist and it was never launched, a bell notification reminds you it is still waiting.
Week of 29 Sep
29 September - 5 October 2026
- 211
Markups can be linked to an issue, and chat can comment on issues
When chat marks up a drawing for an issue, the markup is now linked to it: the issue lists its markups and each markup opens its issue. Chat can also add a comment to an issue, shown as written by the agent.
- 210
Code book search finds sections by the subject named in a page's running header
Code books added from now on keep each page's running header, such as a country name, with that page's sections, so searching by that subject finds them. Headers that only carry section or page numbers are left out.
- 209
Bluebeam connections stay connected when you have not used them for a week
Bluebeam expires a connection that goes unused for 7 days, so returning after a week away meant reconnecting. Connections are now refreshed daily in the background so they stay live.
- 208
Chat no longer loses a message when the connection drops mid-turn
A message sent while the connection to chat was unstable could be lost, leaving the agent silent; it is now held until it is delivered. A turn that reaches the one-hour time limit now says your work was saved and you can send continue, instead of saying the agent stopped responding.
- 207
Scroll view loads only the pages on screen, so large drawing sets open faster
In scroll view, page images now load for the visible pages and their neighbours instead of every page at once. On a 400-sheet set this avoids starting hundreds of megabytes of downloads together.
- 206
A Revit model whose preview conversion fails now says so instead of staying at 90 percent
Long Revit model conversions no longer stall partway, and a conversion that does fail is shown as failed rather than as still in progress. A failed Revit file with no sheets no longer reports that it was processed.
- 205
Code books with thin page-border lines are no longer held back from going live
Books whose pages carry thin border rules no longer get stuck in draft while being read. A book that was read correctly is also no longer described as a scanned PDF.
- 204
Code book names show their edition year, and a rename applies to your organization only
Code books are listed with their edition year, and the code viewer heading shows the book's name. Renaming a shared book sets the name for your organization without changing it for anyone else.
- 203
Chat no longer files duplicate issues or redraws markups that are already there
Before chat creates an issue it now checks for an existing issue on the same spot, and reports the existing one instead of filing the same finding again. Highlights and clouds that match a mark already on the page are no longer drawn a second time.
- 202
Single-line diagram detection boxes start off, and overlays you switch off stay off after a reload
Single-line diagram detection boxes no longer appear by default in the drawing viewer. Turning an overlay off is now remembered across reloads, and new overlay layers still show with their default setting.
- 201
Chat no longer asks you to resend a message that is still running, or runs it a second time
When a new message interrupted a busy chat, or the service restarted mid-reply, chat could tell you to send your message again while it was still being worked on, and some messages ran twice. Chat now picks the running message back up and reports an interrupted reply as interrupted.
- 200
An expired session now takes you to the sign-in page instead of leaving the page quietly failing
When your session ends, for example in a tab left open overnight, the app now stops refreshing in the background, shows one notice and takes you to the sign-in page once. Previously the page could stay open with updates silently failing for hours.
- 199
Chat keeps working on pages with very large numbers of markups and no longer shows raw error text
Asking chat about a page with thousands of markups could stop the reply partway; chat now gets a summary of a busy page's markups and can filter them by type, status, author or area. Internal error messages no longer appear in chat replies or reply emails.
- 198
Chat finds and runs checks and saved checklists by name, and reuses results that already exist
Chat can find and run built-in checks, your custom checks and your saved checklists by name. If a check has already run, chat answers from those results and re-runs it only when you ask.
- 197
Ask chat to save a checklist to your library without running it
You can ask chat to save a checklist to your library without running it. For a checklist over 300 rows, chat asks you to upload it from My library instead.
- 196
Upload a checklist into your own library from My resources
New checklist on My resources uploads a checklist into your own library without running anything. It stays private until you share it.
- 195
Sheets with no text layer are compared visually
A sheet with no text layer is now compared visually and labelled "No text - compared visually". Before, it was reported as unchanged or as 100% text changed, and now it can come out as no visible change.
- 194
Markups snap to drawing content
When you draw a markup, it now snaps to lines and points on the drawing. Snapping ignores hidden layers and geometry that is clipped out of view.
- 193
Closing the context notice in chat now hides it
Clicking the X on the context notice in chat now hides the banner.
- 192
Check status is shown correctly for cancelled, queued and completed checks
Cancelled custom checks no longer stay on running, and checks waiting in a large list are no longer marked failed. Completed checks no longer show an error from an earlier attempt.
- 191
Search, filters, export and select-all now include pinned issues
The pinned section of the Issues list now follows search and every filter, and pinned issues are included in export and select-all and have their own selection checkbox. Opening an issue from the drawing or a link now clears a filter that was hiding it.
- 190
Pinned issues are now included in export and select-all, and pinned cards can be selected
Exporting or selecting all issues now includes pinned issues, and pinned issue cards have the same selection checkbox as the rest of the list. Opening an issue from the drawing or from a shared issue link now clears any filter that was hiding it, including when the issue is pinned.
- 189
Search and filters now apply to pinned issues in the issues list
Pinned issues at the top of the issues list now follow search and the status, severity, assignee, source and on-this-page filters. Before, most issues sat in the pinned section and ignored these controls, so search and filtering looked like they did nothing.
- 188
Chat in the Revit add-in no longer fails its first attempt to work in your model
For Revit users, chat's first attempt to read or change the open model often failed with a missing tool error, and could tell you its model tools were unavailable. It now reaches those tools on the first try.
- 187
Chat proposes attached detail group changes straight away for your approval
For Revit users, when you ask chat to change an attached detail group it now proposes the change in the same reply, stating the consequence on the approval bar, instead of asking you to confirm first.
- 186
Long chat threads keep much more history before older messages are condensed
Chat now holds far more of a long conversation before it condenses earlier messages, and the notice that a thread is getting heavy appears later, so you no longer need to start a new thread while most of the room is still unused.
- 185
Long markup requests in chat no longer stop partway
Chat now places up to 100 markups on a document in one step, so marking up dozens of items on a sheet no longer fills the conversation and aborts the turn. If a conversation does fill up, the message now says the work so far is saved and to send "continue", instead of asking you to send your message again.
- 184
One click on a revision cloud opens its issue card
Clicking a revision cloud on a drawing now opens its issue card straight away, the same as clicking its text box, instead of needing a second click.
- 183
Team members and organization owners can comment on issues
People with edit access through their team, and organization owners, could edit, waive and assign an issue but were refused when adding a comment; they can now comment.
- 182
Chat can measure the area of a region on a drawing
Ask chat for the area of a hatched, shaded or outlined region, or of a shape you describe by its corners, and it measures it from the drawing's own linework, listing other regions with the same hatch and their total. It asks for a scale when none can be found and says so rather than estimating when a region is not closed.
- 181
Project chat can undo its own edits to a file
If chat changes a file, for example removing an element from a 3D model, you can ask it to undo and it will look up the file's earlier versions and restore the one you want.
- 180
Chat knows which element you have selected in the 3D model viewer
Select an element in the 3D model viewer and you can ask chat about "the highlighted one" without describing it.
- 179
Uploading a checklist that already exists now shows the existing list instead of making a silent copy
When you upload a checklist file that matches one already in your account, a dialog now shows the existing list with its owner, date, who it is shared with, number of checks and last run, so you can use it or deliberately upload a separate copy. Previously an identical upload could quietly create a second copy with no warning.
- 178
Label filters no longer hide your own checklists and workflows
Your own items now always stay visible under a label filter, including in the Add existing checklist picker. Tab counts now show the full number of items with how many are hidden beside it, so a filtered shelf no longer reads as empty.
- 177
Very long chat jobs now finish with a report instead of an error
On large batch requests chat now wraps up the item in hand and tells you what is done and what is left before it reaches its step limit. If it still runs out, the reply says your work so far is saved and you can send continue, instead of asking you to resend the message.
- 176
Filing a check under an existing section in a checklist no longer creates a second heading
The check now moves to the end of that section, move and section pickers no longer reappear after you leave edit mode, and the projects picker explains why it is empty.
- 175
Starting a checklist run now tells you which checks were skipped or not run
The confirmation after launching a checklist now lists checks skipped as not applicable and checks that could not run, with the reason, instead of dropping them from the message.
- 174
Delete code books from the code browser
Stewards can delete any code book, and a team lead can delete a book shared into their team while it is not yet published for everyone. The code browser's editor now has a two-step control to delete a code book or delete it for everyone.
- 173
The "near its context limit" warning in chat no longer appears on busy first messages
The notice now measures how much the conversation actually holds, so it no longer warns early in a thread, and it clears itself when a thread gets lighter.
- 172
Deleting a project removes it from your organization structure
Deleting a project now clears it from your organization's structure instead of leaving a stray entry, and a team that held only deleted projects can once again be deleted.
- 171
Project people list no longer shows an invite date for team or organization access
People who can open a project through their team or organization-wide sharing no longer appear with an invitation date in the project's people list; only people who were actually invited show one.
Week of 22 Sep
22 - 28 September 2026
- 170
Messages sent right after a reload during a streaming answer are no longer lost
Reloading the page while an answer was still streaming could briefly show an empty document chat with a Send button, and a message sent in that moment was silently lost. Chat now stays in a connecting state until the conversation finishes loading, so those messages are no longer dropped.
- 169
Reloading during a chat answer no longer loses a message you send
If you reload the page while an answer is still coming back, the chat now waits and shows a connecting state until it catches up with the running turn, instead of briefly showing an empty box where a message you send could be lost.
- 168
Uploads resume after a dropped connection instead of failing
Uploading files now retries and resumes automatically through a network interruption, showing a reconnecting status while it waits, so large uploads no longer fail partway. When a connection cannot be restored, the message makes clear nothing is wrong with the file.
- 167
Code books with rotated pages no longer fail to import
Code books that contained rotated pages could fail to import and be abandoned after several attempts. These documents now import correctly.
- 166
Spelling check reads clean civil and landscape sheets it used to skip, and no longer lists a word twice
The spelling check now flags misspellings on clean civil and landscape sheets that were previously passed over as unreadable. It also reports each misspelled word once instead of showing the same word across two separate lists.
- 165
The organization code library list loads instead of timing out
Opening your organization's list of code books no longer times out for accounts with many books, so a list that had been failing to load now returns quickly.
- 164
Drawing preview images no longer appear rotated or upside down
Preview images for uploaded drawings are now generated in the orientation the page actually draws, so covers and thumbnails that had appeared rotated or upside down show the right way up. Existing previews are repaired as well.
- 163
Pressing Run on a code adds it to the project and runs it
You can press Run on any code book you can open and it is added to the project's code list and reviewed in one step, instead of being refused because it was not already on the project.
- 162
Re-run is available for checks waiting on input
You can now re-run a check that is waiting on your input directly from the checks panel.
- 161
Chat can remember notes you save and reuse them in later conversations
You can save notes for yourself, a project, your team, or your organization, and chat uses them in later chats. Saved notes can be reviewed and edited from your settings, your team page, and each project.
- 160
Chat recovers better from brief network drops
Chat now handles short network interruptions more reliably, so fewer conversations are cut off when the connection briefly drops.
- 159
Chat emails you when a long reply is done
When a chat reply takes a while, chat can email you as soon as it finishes, automatically after 10 minutes or whenever you ask.
- 158
Reorder checklist items, file them under sections, and move them between checklists
You can now drag to reorder items in a checklist, group them under sections, and move an item to another checklist, with a search box to find the destination.
- 157
Ask chat for your plan and remaining balance
You can now ask chat about your current plan and how much balance you have left.
- 156
Chat can email you when a long reply is ready
Chat can now email you when a reply is ready, and does so automatically for any reply that takes ten minutes or longer, so you do not have to wait with the chat open.
- 155
Review codes stage shows every usable code book
When picking codes for a review, the codes stage now lists books uploaded to the project as well as those shared with your team.
- 154
Review plan's codes stage lists books shared with the team
The codes stage of the review plan now lists code books uploaded into the project and those shared with its team, so shared books are no longer left out.
- 153
Code library is grouped into sections
The code library is now split into your organisation's codes, national codes and your checklists. Books are placed under the correct jurisdiction, so regional books no longer fall into a mislabelled national pile.
- 152
Code books that fail to convert now retry and notify you
When an uploaded code document fails to convert, it now retries automatically and sends you a held notice, instead of getting stuck silently with no alert.
- 151
Assigning a project to a team now shares it with that team
Assigning a project to a team now shares it with that team by default, with a per-team share toggle in the upload wizard and project settings. Project owners are notified whenever a project is shared with a new team.
- 150
Measuring checks save partial findings instead of returning nothing
A measuring check that runs out of time now keeps the findings it already made and reports where it stopped, instead of ending with nothing saved. It also declines to answer from a page view too small to read accurately rather than returning a wrong measurement.
- 149
Failure messages read in plain language with a reference code
When a check, chat reply, notification or plugin dialog fails, you now see a plain-language explanation and a reference code instead of raw internal error text.
- 148
Asking about an issue by number matches the number on the card
When you ask chat about an issue by its number, it now resolves to the same number shown on the card and lists every live copy when a number is shared, instead of failing or showing a different number.
- 147
Continue a long conversation in a new chat that keeps its context
When a chat grows long, you can start a fresh chat from the notice and it is prefilled with the earlier conversation's context so you can keep going.
- 146
Markups from Bluebeam Studio appear on the drawing
Markups you make in a Bluebeam Studio session now import and display on the drawing, including clouds, callouts with their leader lines, and text that was previously not shown.
- 145
Checks and checklists run on projects that contain a board
Running checks, a checklist, or a project review on a project that also contains a board no longer fails the whole run. Boards are now skipped instead of stopping every item.
- 144
Rotate an overlaid sheet on screen
You can now turn an overlaid sheet left or right in 90 degree steps with buttons on each layer, or by asking in chat. You no longer have to rotate the source file and overlay it again.
- 143
Starting a review no longer runs it twice after a reload
Reloading the page, or navigating away and back, before a formal review finished no longer starts a second copy of the same review. The review is no longer run twice on the same request.
- 142
Overlays of rotated or differently sized sheets line up correctly
Overlaying a sheet that is rotated or a different size from the base now aligns it accurately instead of placing it hundreds of points off. Bad automatic alignments that collapsed a sheet onto a single point are no longer produced or shown.
- 141
Imported Bluebeam markups now appear on the drawing
Markups imported from Bluebeam, including clouds, rectangles and callouts, could be invisible on the drawing. They now render correctly.
- 140
Reprocessing a non-PDF file no longer erases it
Reprocessing a file that is not a PDF, such as a model or spreadsheet, now reprocesses the whole file correctly instead of failing and erasing the document. When a file cannot be reprocessed the app now says so clearly instead of reporting a restart that did not happen.
- 139
Upload your own code-books and checklists when setting up a review
The review setup screen again lets you bring your own code-books and checklists alongside choosing what to check, with per-file upload progress. An upload in progress is kept if you move back and forward through the steps.
- 138
Sharp text when you zoom into very large sheets
When you zoom in on very large sheets, small text is now rendered at full detail instead of appearing blurry, and these oversized sheets let you zoom in further.
- 137
Zooming deep into a sheet no longer flashes a distorted close-up
When you zoom far into a drawing and pan around, the previous close-up no longer briefly appears squeezed into the new area. The sharper view now shows only after it has fully loaded.
- 136
Confirm a page scale before measuring, with engineering presets and accurate calibration
Before you measure a length or polyline on a page whose scale you have not confirmed, the viewer now asks you to confirm the scale first, adds engineering presets from 1 inch = 10 feet up to 100 feet for civil sheets, and two-point calibration now produces accurate lengths.
- 135
Sharper text when zooming into very large sheets
When you zoom into very large sheets, the viewer now renders a high-resolution crop of the area you are viewing so small notes and text stay legible instead of blurring out. These sheets also let you zoom in further than before.
- 134
Chat can restart processing for a document that failed
When a document failed or was cancelled during processing, you can now ask chat to restart it. It will not restart a document that is still processing, or one that already succeeded unless you ask.
- 133
The codes library no longer gets stuck on a loading spinner
The codes library reliably finishes loading, and shows an error when one happens instead of spinning forever with the failure hidden underneath.
- 132
Exporting an annotated PDF works when issues cite pages past the set
Exporting an annotated PDF no longer fails when an issue points at a page beyond the end of the drawing set, and the export menu item is now clearly labeled and clickable.
- 131
Exporting an annotated PDF no longer gets stuck or fails
Reviewers can again export an annotated PDF, including from large documents and when issues cite pages beyond the end of a drawing set. The export menu item is now clearly labelled and clickable, and the viewer no longer breaks when navigating to a page that does not exist.
- 130
A failed code book now says it failed instead of asking you to wait
When a code book's processing fails, it now tells you it failed and asks you to upload it again, instead of saying it can be shared once processing finishes.
- 129
Edit checklists in a dedicated edit mode with always-visible controls
Editing a checklist is now a dedicated edit mode where each check's controls stay visible instead of appearing only on hover. Deleting a checklist now returns you to the checklist creator.
- 128
Edit and delete controls on each check stay visible in edit mode
After you enter edit mode on a checklist, the edit and delete control on every check is always shown instead of appearing only on hover, and it now works on touch devices.
- 127
Add a check from the checklist page
You can now add a check to a checklist directly from the checklist page.
- 126
Ask chat to clear overlays and start from the base sheet
You can now ask chat to clear all overlays and start over from the base sheet alone.
- 125
Ask chat to move an issue to another page instead of duplicating it
You can now ask chat to move an existing issue to another page of the same document. It re-anchors that same issue instead of filing a new duplicate and leaving the original open.
- 124
Revit gbXML audit detects a missing floor
For Revit users, the gbXML audit now detects a missing floor in the model, which it previously could not see.
- 123
Continuous-scroll viewer zooms to the cited issue box
Opening a cited issue now zooms to its highlighted box even when the viewer is in continuous-scroll mode.
- 122
Chat messages are acknowledged and resent so they no longer silently fail
A message you send in chat is now confirmed by the server and automatically resent if the connection drops while sending. A message can no longer silently disappear when the connection is dying.
- 121
Add-in reports unlinked after a linked project is deleted
For Revit users, after a linked project is deleted the add-in now shows the file as unlinked instead of still showing it connected to a project that no longer opens.
- 120
Chat snips recover from a failed image load
When you snip a region of a drawing to ask about it in chat, a failed image load now retries and falls back to a lower-resolution view, so the snip no longer fails.
- 119
Empty issue source tiles are disabled and clearing a selection shows all issues
Issue source tiles that have nothing to show are now disabled, and clearing your selection falls back to showing all issues so the list no longer goes blank.
Week of 15 Sep
15 - 21 September 2026
- 118
Issue clouds update on the drawing as soon as you resolve an issue
Resolving or reopening an issue in the panel now recolours its cloud on the drawing straight away, and the clouds follow the panel's status view, instead of only changing after a page reload.
- 117
Add members to your organization as read-only viewers
Organizations can now give a member a read-only viewer role, letting them open and read everything in the account while any attempt to make a change is refused.
- 116
Chat now names who is assigned to a finding and who changed its status
When you ask about findings in chat, the answer now names who each finding is assigned to (with who assigned it and when), who changed its status, and who applied the fix. Findings with no one assigned are shown as unassigned rather than left blank.
- 115
Chat can say who a finding is assigned to and who changed it
When you ask chat about findings, it can now tell you who each one is assigned to and who assigned, resolved or logged it, matching what the Issues tab shows.
- 114
A banner warns when a plotted drawing may be incomplete
When a drawing was plotted but some references could not be resolved or some objects could not be verified as drawn, the drawing view now shows a banner saying the sheets may be incomplete.
- 113
Changing a document's type no longer fails
Changing a document's type returned a server error on every attempt; it now works.
- 112
A check whose connection drops mid-response now retries
A review check that lost its connection partway through a response now retries instead of failing outright.
- 111
Run a saved checklist from chat by name
You can now ask chat to run a saved checklist by its name. Previously a saved checklist could only be started from the link in the upload wizard.
- 110
Chat document tools work when you have not named a document
Asking chat about a page, a spec section, or page details in a project chat without specifying a document now finds the document or offers a list of choices, instead of returning an error.
- 109
Chat shows what a long turn is doing and how long it has run
During a long response, chat now shows a status line describing what it is working on and the elapsed time, and a running tool shows how long it has been running. This replaces the previous fifteen-minute stall notice.
- 108
Chat answers recovered after a connection drop are saved to your history
A chat reply produced while your connection briefly dropped is now saved to your chat history and used as context for your next message, instead of disappearing. The chat also reconnects to an in-progress answer more quickly.
- 107
Assigning an issue is refused when the item changed since your page loaded
If someone else changed an issue since your Issues page loaded, a bulk assignment now stops and refreshes the affected rows instead of writing the change and emailing someone about work already closed.
- 106
Moving an issue's cloud from chat follows the box shown in the viewer
Asking chat to move or resize an issue's cloud now moves the box drawn in the viewer, instead of failing and dropping the marker at the corner of the page. The boxes drawn around cited text also fit more tightly around the words.
- 105
Very large drawing sheets no longer fail during review
Extremely large sheets that previously caused the document to fail now process successfully. Sheets that already worked are unchanged.
- 104
Top-up receipts go to the person who paid
A receipt for a balance top-up is now emailed to the person who made the payment, rather than to a single address saved the first time anyone on the account topped up.
- 103
Chat can tell you the comment left when an issue was waived
When you ask chat who waived an issue, it now also returns the reason the reviewer typed at the time. It works for waivers made before this change.
- 102
Clearer message when a code is not in the library
Opening a code that is not in your library now shows 'This code is not in the library' instead of a generic load-failure error.
- 101
Opening a code that is not in your library now says so instead of showing a load error
When you open a link to a code that is not in your library, the page now tells you the code is not in the library. Previously it showed a failed-to-load error that looked like an outage.
- 100
Add project background that every check treats as fact
You can now enter project background in a box on the review pane and when you set up a project, placed at the top so it is clear it applies whichever way you start a review. Every check treats what you enter there as fact.
- 99
Large annotated exports run in the background and finish faster
Exporting annotated drawings no longer times out on large sets: the export now runs as a background job with live progress, defaults to just the marked-up sheets, and completes several times faster.
- 98
Code reviews refuse to substitute an unrelated code book
When your drawings name a code that has not been loaded, a code review no longer quietly reviews against an unrelated code from another place; it marks that code unavailable and says which book to add.
- 97
Exporting an output chat just made now works
When chat creates an output and you export it in the same reply, the export now finds it instead of returning an error.
- 96
Running reviews show live progress instead of stalling
A running review now updates live with how long it has been queued, how many parts have finished, and an estimated finish time, instead of a card that stopped updating after 10 minutes. The completion notice now names any parts that failed instead of always reading as a clean pass.
- 95
New version comparisons show in the runs list right away
A freshly started Compare Versions run now appears in the runs list and shows as queued immediately, instead of staying hidden until it finished.
- 94
Code reviews stop wrongly refusing or mismatching code books
Running a code review no longer refuses a code book the project already holds, and no longer matches one of your code books to a different code. A code review that could not examine anything now shows an error you can retry instead of being reported as passed.
- 93
Long chat conversations resume instead of failing to reconnect
A chat with a large history no longer fails to reconnect with a 'lost contact with the agent' error. These conversations now resume reliably.
- 92
Assigning a team to a project now shares the project with that team
When you assign a team to a project, that team's members are automatically given access to the project.
- 91
Clearer message when sign-in needs IT approval
When single sign-on needs your organisation's IT approval, you now see a clear message asking you to have IT approve access or use a sign-in link, instead of a generic authentication error.
- 90
Assign a new project to several teams at once
When you create a project you can now assign it to more than one team at once, instead of only a single team.
- 89
Comment closure results are easier to read and filter
The results list now shows each comment's number and text instead of an internal id, keeps them in number order, and lets you filter by typing comment numbers like 12, 10-20 or 3, 7, 10-12 alongside the verdict filters. Each comment is drawn as a box on its page in a colour matching its verdict, and clicking a box selects that comment's row.
- 88
Going back from a drawing view returns you to setup
Closing or stepping back from a drawing view could leave you stuck on the view instead of returning to the previous screen. Going back now reliably returns you to setup.
- 87
Check findings appear live without a page reload
When a check is running, its findings now appear as they are created, instead of only after a full page reload.
- 86
Issues from a running check now appear without a page reload
When you open a check while it is still running, newly found issues now show up as they are created instead of staying empty until you reload the page.
- 85
Rebuilding a checklist no longer produces duplicate findings
Rebuilding a saved checklist no longer causes its checks to run twice, so a single launch no longer produces duplicate findings.
Week of 8 Sep
8 - 14 September 2026
- 84
Your profile now explains your role and lists your teams
Your profile now spells out what your organisation role lets you do and lists the teams you belong to. Any team you lead is marked with a badge.
- 83
Know why a code book upload did not go live
When a code book you upload cannot be added automatically, you are now told what happened and why, instead of it silently disappearing.
- 82
Bluebeam Studio connections no longer drop unexpectedly
Your Bluebeam Studio connection no longer occasionally disconnects and flags your projects as needing to reconnect while the platform renews its access in the background.
- 81
Set a document's type while uploading, and see it on the file row
You can now choose a document's type as you upload it, and the chosen type is shown on the file's row.
- 80
The assistant reports check-launch progress accurately
When you ask the assistant whether a check launch finished, it now reports how many checks are still queued, running or waiting for documents. It no longer implies every check ran when some are still pending.
- 79
The intake wizard's Ask step now starts a review
Asking a question in the intake wizard's Ask step now starts the review it promises, instead of leaving it un-started.
- 78
Assign menu no longer gets cut off in a narrow panel
When assigning issues or comments from a narrow panel, the assignee menu could be clipped so names were unreadable and you had to resize the window. It now stays fully on screen.
- 77
A check that fails to run no longer shows as a pass
A check that could not complete used to show a green pass in the results tally. It now reports as not run, so a failure is never mistaken for a clean result.
- 76
Get an email when a long-running task finishes
You now get an email when a task that runs longer than 10 minutes finishes or fails, including reviews, code reviews and comparisons. This is on by default, so you no longer need to keep the tab open.
- 75
Resolved and waived findings update on the drawing and clear from the list instantly
Resolved findings now turn green on the drawing and waived ones are removed from it, and each issue card shows who cleared it. Clearing a finding also removes it from the list immediately, with a simple undo instead of a countdown.
- 74
Saved takeoff workflows can be re-run from the tab
For Revit users, saved takeoff workflows now appear as chips under the toolbar, so you can click to re-run one or delete it. Previously a saved takeoff workflow could only be run by asking the chat for it by name.
- 73
Ask project chat who did what on a project
Project chat can now answer who did what on a project, attributing launched checks, issue status changes, assignments and markups to the person who made them.
- 72
Chat no longer fails a message after a brief connection problem
A chat message could sometimes end with an error after a brief network problem even though nothing was wrong. Chat now retries the connection and finishes the message.
- 71
Code books show processing while they load and update the review right away
A code book now shows as processing while it is being ingested, instead of reading as not on the project, and adopting a code updates the review immediately without a reload.
- 70
See teammates' issue changes without reloading
When two people work the same project, one person's issue assignments, status changes and comments now appear for the other right away instead of only after a full page reload.
- 69
Tighter, more accurate change boxes when comparing versions
When comparing two versions of a drawing, changed items are now boxed more precisely: each cited block gets its own tight rectangle instead of one large box, and more changes get a box at all.
- 68
The setup wizard now starts the review you asked for automatically
After you ask for a review in the project setup wizard, that review now starts on its own once your drawings finish processing, instead of leaving you to find and press the button yourself.
- 67
Add or remove code books from project chat
You can now ask project chat to add a code book to a project or take one off, instead of switching to the codes panel to do it by hand.
- 66
Opening a project reopens the file you last had open
Opening a project now reopens the document you last viewed there, or the project's first drawing, instead of showing an empty viewer.
- 65
Dark mode
You can now switch the app to a dark theme from the toggle in the top bar, and your choice is remembered. The document viewer, issue cards and other surfaces follow the theme.
- 64
Code library action buttons no longer overlap the title and sharing label
In the code library a book row's action buttons could paint over the book title and its sharing label. The buttons now stay in their own column and wrap rather than overlapping.
- 63
Checks that could not judge no longer show as a green pass
A check that reported not applicable or insufficient evidence used to draw a green tick and count as passed, and clicking it showed an empty list. It now shows a neutral result carrying the reason it could not judge.
Week of 18 Aug
18 - 24 August 2026
- 62
A custom check reports its state, however it ends
A run that stops early now says so in the review feed instead of leaving it looking as though the check was never started.
- 61
A tidier action row on every finding
The buttons under a finding are grouped into two tiers, so the ones you reach for most are the ones in front of you.
- 60
The pane and the web app hold separate sessions
Signing in to one no longer ends the other, so you can keep both open through a working day.
- 59
A blank capture says so
When a view renders nothing, you are told the view came back empty rather than handed a mystery white image.
- 58
The pane shows you it is working
A running indicator during long operations, and a gentle reminder to save first. Long-running model code stops at a time limit instead of appearing to freeze.
- 57
Release notes for the plugin
Each new release now has a page describing what changed, and the download page names the difference between a personal install and an IT-managed one.
Week of 11 Aug
11 - 17 August 2026
- 56
Sheet crops of the elements you ask about
Ask about a component in the pane and the answer includes the drawing it appears on, cropped to it, with annotations clipped to the view.
- 55
Open and edit Office documents in the browser
Specifications, schedules and reports open in place, without a download, edit and re-upload round trip.
- 54
The add-in version is always on screen
A version chip in the pane, so you and your IT team can see which build is running without opening anything.
- 53
Accented filenames survive a download
A file whose name carries non-English characters keeps that name through every download and export instead of failing on the way out.
- 52
The assign menu opens beside the finding
It had been appearing away from the button you pressed.
- 51
Images in a conversation open properly
A picture chat produced renders inline, enlarges when clicked, and is still there when you scroll back.
- 50
The review panel, reorganised
Already run is a heading over the checks you have used, not a fourth door competing with the three ways in. The results drawer opens when you arrive and steps aside when you open something.
- 49
A code added after a run can be run
It had no way to be started without redoing the review. Starting a code review also queues the codes that are not ready yet.
- 48
Adding codes, rebuilt
A source rail on one side and a basket on the other, so you gather books from anywhere and add them in one go. Uploads offer three destinations, and Re-detect says plainly what it did and when it failed.
- 47
The pane tells you when the add-in is out of date
A banner appears with a self-serve way to fix it, and it points IT-managed installs at the right installer rather than the per-user one.
- 46
Ask questions of the code library
A chat panel beside the library, which you can collapse when you want the full width.
- 45
The code library, reorganised
Saved views replace the chip strip, the list filters by place with states nested under their country, and a book can govern more than one discipline. A steward can also un-share a book, and the Sharing column names whose decision each control is.
- 44
Signing in from inside the pane
Sign-in opens in your normal browser and returns you to the pane, instead of stalling on a login screen that could not complete.
- 43
One ACC button, three directions
Get the latest drawings, publish findings back, or do both - chosen from a menu rather than guessed at. The publish dialog counts the findings it is about to send.
- 42
Download what a run started from
The original upload behind a checklist run can be fetched again from the project panel.
Week of 4 Aug
4 - 10 August 2026
- 41
Tell us what the review is for
A review intent template steers which checks get recommended, so a permit set and a coordination pass do not get the same list.
- 40
Manage your team in bulk
Change role, status or business unit for several people at once. Every administrative change is recorded, and removing someone from a unit asks first.
- 39
The pane opens on your projects
Projects is the first thing you see when the pane opens, and chat moves into the side rail rather than taking the whole panel.
- 38
A Drawing Standards group, opening with tag quality
The first home for checks that judge how a set is drawn rather than what it specifies.
- 37
The check name filters the list in place
Pressing it narrows the issues in front of you instead of navigating you somewhere else.
- 36
Every issue has a number
A stable number on each issue, so a finding can be named in an email or a meeting rather than described.
- 35
My codes, your organisation's, and everything else
The library splits into three views, uploading asks where the book should live, and a steward is a role someone holds rather than a setting.
- 34
Clearing a finding actually clears it
The action reported success while leaving the finding in place.
- 33
The organiser says when it is guessing
A drawing stage the organiser inferred rather than read is marked as a guess, so you know which ones to check.
- 32
Start a project with nothing in it
Skip straight to chat creates the project first and lets the drawings follow.
- 31
Start a project from the open model
A model with no drawings behind it yet can become a project directly from the pane.
- 30
Checks that compare one discipline against another
A check can now ask whether something drawn on one sheet is captured, positioned or dimensioned correctly on another.
- 29
Your verdict on a finding survives a re-run
Marking something as not an issue used to be lost the next time the check ran. The judgement now carries forward.
- 28
Finder-style multi-select and batch move
Select a run of files the way you would in Finder and move them together.
- 27
Watch a check as it runs
The panel shows live progress and the check's own working text instead of a spinner.
- 26
Chat can move and edit markups, not just draw them
Ask for a callout to be moved or reworded and it happens on the drawing, including issue overlay clouds and their connected text.
- 25
Compare Versions marks both sheets
Differences are drawn on each side, and a comment thread that spans the two sheets is kept rather than dropped.
- 24
Chat tabs say what they are doing
A status dot separates a conversation still working from one that has finished and not been read, and a new conversation appears in History straight away under a title written for it.
- 23
Connecting a model to a project, rebuilt
Home says which project the open model is already connected to, the connect screen recommends a likely match with the reason for it, and connecting takes you straight in.
Week of 28 Jul
28 July - 3 August 2026
- 22
Resolve works on project-wide checks
Resolving a finding, or marking it as not an issue, now works on checks that look across a whole set as well as a single drawing.
- 21
Drag a placed markup to a new position
A markup in the wrong place no longer has to be deleted and drawn again.
- 20
Web pages render instead of showing their source
An .html file in a project opens as the page it is, however large the file.
- 19
Boards - a shared canvas in every project
Sketch, mark up and think out loud beside the drawings. Boards are files: create or upload one, work in it with colleagues live, drop images in, and keep templates on a private or shared shelf.
- 18
Coordination review for shop drawings, in one place
Submittal review results are gathered into a single view instead of one report per discipline.
- 17
Create project sits on the home page
It is offered beside Bluebeam and ACC rather than hidden a level in.
- 16
ACC import pickers are searchable and sorted
Finding a hub, project or folder in a large ACC account no longer means scrolling an unordered list.
- 15
Save a checklist and run it again
A checklist you have built can be saved and started on another project.
- 14
The projects home works in a narrow window
A drawer rail, a launcher and a pane switcher, so the home page stays usable docked beside Revit or half a screen wide.
- 13
A User Guide page of its own
Every tool, shown in a short clip, on a page you can send to someone rather than a menu you have to find.
- 12
A jump-to control on every piece of evidence
Each evidence crop carries a pill that takes you to that exact spot on the drawing.
- 11
DWG files open on the plotted sheet
The sheet as it plots is what you see first, with the model view a toggle away.
- 10
Every file in a project opens in place
Text, images, media and file types we do not recognise all get a real viewer instead of a download prompt.
- 9
Both drawings sit in the main workspace
A comparison now fills the stage instead of rendering off to one side of it.
- 8
Signing in to Bluebeam keeps you signed in here
Re-authenticating with Bluebeam was ending the Structured session alongside it.
- 7
Workflows and tags in the pane
Run a saved workflow, and read model tags, without leaving Revit.
- 6
Back to checklist, from any finding
A finding opened from a checklist keeps the way back to it.
- 5
Comment closure
A review comment can be tracked from raised through to resolved, so nothing is closed without a recorded answer.
- 4
Drop a file onto a version stack
Filing a re-issue is a drag rather than a trip through a menu, and drops onto an open folder land where you aim them.
Week of 21 Jul
21 - 27 July 2026
- 3
Takeoff in the plugin
Quantities grouped by room and space, concrete broken out by type, readable totals and select-all.
- 2
Autodesk Construction Cloud connector
Pull a drawing set straight from ACC. The permission screen names the minimum access it needs, so IT can approve it in one pass.
- 1
Managed installs update themselves
An IT-deployed plugin attempts its own update, so a whole team moves forward together.